Firmware Version:
3.1.15(LS)
Voice
Phone Adapter with 2 Ports for Voice-Over-IP
PAP2
Info
System
SIP
Provisioning
Regional
Line 1
Line 2
User 1
User 2
Advanced View
(switch to basic view)
User Login
System Information
DHCP:
Enabled
Current IP:
192.168.2.81
Host Name:
LinksysPAP
Domain:
Current Netmask:
255.255.255.0
Current Gateway:
192.168.2.1
Primary DNS:
192.168.2.1
Secondary DNS:
Product Information
Product Name:
PAP2T
Serial Number:
FLI00F545786
Software Version:
3.1.15(LS)
Hardware Version:
0.1.5
MAC Address:
0016B69209C1
Client Certificate:
Installed
Customization:
Open
System Status
Current Time:
1/1/2003 12:00:05
Elapsed Time:
00:00:05
Broadcast Pkts Sent:
2
Broadcast Bytes Sent:
684
Broadcast Pkts Recv:
1
Broadcast Bytes Recv:
60
Broadcast Pkts Dropped:
0
Broadcast Bytes Dropped:
0
RTP Packets Sent:
0
RTP Bytes Sent:
0
RTP Packets Recv:
0
RTP Bytes Recv:
0
SIP Messages Sent:
0
SIP Bytes Sent:
0
SIP Messages Recv:
0
SIP Bytes Recv:
0
External IP:
Line 1 Status
Display Name:
User ID:
Hook State:
On
Registration State:
Offline
Last Registration At:
Next Registration In:
Message Waiting:
No
Call Back Active:
No
Last Called Number:
Last Caller Number:
Mapped SIP Port:
Call 1 State:
Idle
Call 2 State:
Idle
Call 1 Tone:
None
Call 2 Tone:
None
Call 1 Encoder:
Call 2 Encoder:
Call 1 Decoder:
Call 2 Decoder:
Call 1 FAX:
Call 2 FAX:
Call 1 Type:
Call 2 Type:
Call 1 Remote Hold:
Call 2 Remote Hold:
Call 1 Callback:
Call 2 Callback:
Call 1 Peer Name:
Call 2 Peer Name:
Call 1 Peer Phone:
Call 2 Peer Phone:
Call 1 Duration:
Call 2 Duration:
Call 1 Packets Sent:
Call 2 Packets Sent:
Call 1 Packets Recv:
Call 2 Packets Recv:
Call 1 Bytes Sent:
Call 2 Bytes Sent:
Call 1 Bytes Recv:
Call 2 Bytes Recv:
Call 1 Decode Latency:
Call 2 Decode Latency:
Call 1 Jitter:
Call 2 Jitter:
Call 1 Round Trip Delay:
Call 2 Round Trip Delay:
Call 1 Packets Lost:
Call 2 Packets Lost:
Call 1 Packet Error:
Call 2 Packet Error:
Call 1 Mapped RTP Port:
Call 2 Mapped RTP Port:
Line 2 Status
Display Name:
User ID:
Hook State:
On
Registration State:
Offline
Last Registration At:
Next Registration In:
Message Waiting:
No
Call Back Active:
No
Last Called Number:
Last Caller Number:
Mapped SIP Port:
Call 1 State:
Idle
Call 2 State:
Idle
Call 1 Tone:
None
Call 2 Tone:
None
Call 1 Type:
Call 2 Type:
Call 1 Encoder:
Call 2 Encoder:
Call 1 Decoder:
Call 2 Decoder:
Call 1 FAX:
Call 2 FAX:
Call 1 Remote Hold:
Call 2 Remote Hold:
Call 1 Callback:
Call 2 Callback:
Call 1 Peer Name:
Call 2 Peer Name:
Call 1 Peer Phone:
Call 2 Peer Phone:
Call 1 Duration:
Call 2 Duration:
Call 1 Packets Sent:
Call 2 Packets Sent:
Call 1 Packets Recv:
Call 2 Packets Recv:
Call 1 Bytes Sent:
Call 2 Bytes Sent:
Call 1 Bytes Recv:
Call 2 Bytes Recv:
Call 1 Decode Latency:
Call 2 Decode Latency:
Call 1 Jitter:
Call 2 Jitter:
Call 1 Round Trip Delay:
Call 2 Round Trip Delay:
Call 1 Packets Lost:
Call 2 Packets Lost:
Call 1 Packet Error:
Call 2 Packet Error:
Call 1 Mapped RTP Port:
Call 2 Mapped RTP Port:
System Configuration
Restricted Access Domains:
Enable Web Server:
yes
no
Web Server Port:
Enable Web Admin Access:
yes
no
Admin Passwd:
User Password:
Internet Connection Type
DHCP:
yes
no
Static IP:
NetMask:
Gateway:
Optional Network Configuration
HostName:
Domain:
Primary DNS:
Secondary DNS:
DNS Server Order:
Manual
Manual,DHCP
DHCP,Manual
DNS Query Mode:
Parallel
Sequential
Syslog Server:
Debug Server:
Debug Level:
0
1
2
3
0+H
1+H
2+H
3+H
99
Primary NTP Server:
Secondary NTP Server:
SIP Parameters
Max Forward:
Max Redirection:
Max Auth:
SIP User Agent Name:
SIP Server Name:
SIP Reg User Agent Name:
SIP Accept Language:
DTMF Relay MIME Type:
Hook Flash MIME Type:
Remove Last Reg:
yes
no
Use Compact Header:
yes
no
Escape Display Name:
yes
no
RFC 2543 Call Hold:
yes
no
Softswitch Features:
SIP Timer Values (sec)
SIP T1:
SIP T2:
SIP T4:
SIP Timer B:
SIP Timer F:
SIP Timer H:
SIP Timer D:
SIP Timer J:
INVITE Expires:
ReINVITE Expires:
Reg Min Expires:
Reg Max Expires:
Reg Retry Intvl:
Reg Retry Long Intvl:
Response Status Code Handling
SIT1 RSC:
SIT2 RSC:
SIT3 RSC:
SIT4 RSC:
Try Backup RSC:
Retry Reg RSC:
RTP Parameters
RTP Port Min:
RTP Port Max:
RTP Packet Size:
Max RTP ICMP Err:
RTCP Tx Interval:
No UDP Checksum:
yes
no
Stats In BYE:
yes
no
SDP Payload Types
NSE Dynamic Payload:
AVT Dynamic Payload:
INFOREQ Dynamic Payload:
G726r16 Dynamic Payload:
G726r24 Dynamic Payload:
G726r32 Dynamic Payload:
G726r40 Dynamic Payload:
G729b Dynamic Payload:
NSE Codec Name:
AVT Codec Name:
G711u Codec Name:
G711a Codec Name:
G726r16 Codec Name:
G726r24 Codec Name:
G726r32 Codec Name:
G726r40 Codec Name:
G729a Codec Name:
G729b Codec Name:
G723 Codec Name:
NAT Support Parameters
Handle VIA received:
yes
no
Handle VIA rport:
yes
no
Insert VIA received:
yes
no
Insert VIA rport:
yes
no
Substitute VIA Addr:
yes
no
Send Resp To Src Port:
yes
no
STUN Enable:
yes
no
STUN Test Enable:
yes
no
STUN Server:
EXT IP:
EXT RTP Port Min:
NAT Keep Alive Intvl:
Configuration Profile
Provision Enable:
yes
no
Resync On Reset:
yes
no
Resync Random Delay:
Resync Periodic:
Resync Error Retry Delay:
Forced Resync Delay:
Resync From SIP:
yes
no
Resync After Upgrade Attempt:
yes
no
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
yes
no
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
Firmware Upgrade
Upgrade Enable:
yes
no
Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:
Call Progress Tones
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
DND Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
Feature Invocation Tone:
Distinctive Ring Patterns
Ring1 Cadence:
Ring2 Cadence:
Ring3 Cadence:
Ring4 Cadence:
Ring5 Cadence:
Ring6 Cadence:
Ring7 Cadence:
Ring8 Cadence:
Distinctive Call Waiting Tone Patterns
CWT1 Cadence:
CWT2 Cadence:
CWT3 Cadence:
CWT4 Cadence:
CWT5 Cadence:
CWT6 Cadence:
CWT7 Cadence:
CWT8 Cadence:
Distinctive Ring/CWT Pattern Names
Ring1 Name:
Ring2 Name:
Ring3 Name:
Ring4 Name:
Ring5 Name:
Ring6 Name:
Ring7 Name:
Ring8 Name:
Ring and Call Waiting Tone Spec
Ring Waveform:
Sinusoid
Trapezoid
Ring Frequency:
Ring Voltage:
CWT Frequency:
Synchronized Ring:
yes
no
Control Timer Values (sec)
Hook Flash Timer Min:
Hook Flash Timer Max:
Callee On Hook Delay:
Reorder Delay:
Call Back Expires:
Call Back Retry Intvl:
Call Back Delay:
VMWI Refresh Intvl:
Interdigit Long Timer:
Interdigit Short Timer:
CPC Delay:
CPC Duration:
Vertical Service Activation Codes
Call Return Code:
Blind Transfer Code:
Call Back Act Code:
Call Back Deact Code:
Cfwd All Act Code:
Cfwd All Deact Code:
Cfwd Busy Act Code:
Cfwd Busy Deact Code:
Cfwd No Ans Act Code:
Cfwd No Ans Deact Code:
Cfwd Last Act Code:
Cfwd Last Deact Code:
Block Last Act Code:
Block Last Deact Code:
Accept Last Act Code:
Accept Last Deact Code:
CW Act Code:
CW Deact Code:
CW Per Call Act Code:
CW Per Call Deact Code:
Block CID Act Code:
Block CID Deact Code:
Block CID Per Call Act Code:
Block CID Per Call Deact Code:
Block ANC Act Code:
Block ANC Deact Code:
DND Act Code:
DND Deact Code:
CID Act Code:
CID Deact Code:
CWCID Act Code:
CWCID Deact Code:
Dist Ring Act Code:
Dist Ring Deact Code:
Speed Dial Act Code:
Secure All Call Act Code:
Secure No Call Act Code:
Secure One Call Act Code:
Secure One Call Deact Code:
Conference Act Code:
Attn-Xfer Act Code:
Modem Line Toggle Code:
Referral Services Codes:
Feature Dial Services Codes:
Vertical Service Announcement Codes
Service Annc Base Number:
Service Annc Extension Codes:
Outbound Call Codec Selection Codes
Prefer G711u Code:
Force G711u Code:
Prefer G711a Code:
Force G711a Code:
Prefer G723 Code:
Force G723 Code:
Prefer G726r16 Code:
Force G726r16 Code:
Prefer G726r24 Code:
Force G726r24 Code:
Prefer G726r32 Code:
Force G726r32 Code:
Prefer G726r40 Code:
Force G726r40 Code:
Prefer G729a Code:
Force G729a Code:
Miscellaneous
Set Local Date (mm/dd):
Set Local Time (HH/mm):
Time Zone:
GMT-12:00
GMT-11:00
GMT-10:00
GMT-09:00
GMT-08:00
GMT-07:00
GMT-06:00
GMT-05:00
GMT-04:00
GMT-03:30
GMT-03:00
GMT-02:00
GMT-01:00
GMT
GMT+01:00
GMT+02:00
GMT+03:00
GMT+03:30
GMT+04:00
GMT+05:00
GMT+05:30
GMT+05:45
GMT+06:00
GMT+06:30
GMT+07:00
GMT+08:00
GMT+09:00
GMT+09:30
GMT+10:00
GMT+11:00
GMT+12:00
GMT+13:00
FXS Port Impedance:
600
900
600+2.16uF
900+2.16uF
270+750||150nF
220+820||120nF
220+820||115nF
370+620||310nF
Daylight Saving Time Rule:
FXS Port Input Gain:
FXS Port Output Gain:
DTMF Playback Level:
DTMF Playback Length:
Detect ABCD:
yes
no
Playback ABCD:
yes
no
Caller ID Method:
Bellcore(N.Amer,China)
DTMF(Finland,Sweden)
DTMF(Denmark)
ETSI DTMF
ETSI DTMF With PR
ETSI DTMF After Ring
ETSI FSK
ETSI FSK With PR(UK)
FXS Port Power Limit:
1
2
3
4
5
6
7
8
Caller ID FSK Standard:
bell 202
v.23
Feature Invocation Method:
Default
Sweden
More Echo Suppression:
yes
no
Line Enable:
yes
no
Streaming Audio Server (SAS)
SAS Enable:
yes
no
SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings
NAT Mapping Enable:
yes
no
NAT Keep Alive Enable:
yes
no
NAT Keep Alive Msg:
NAT Keep Alive Dest:
Network Settings
SIP TOS/DiffServ Value:
Network Jitter Level:
low
medium
high
very high
extremely high
RTP TOS/DiffServ Value:
Jitter Buffer Adjustment:
up and down
up only
down only
disable
SIP Settings
SIP Port:
SIP 100REL Enable:
yes
no
EXT SIP Port:
Auth Resync-Reboot:
yes
no
SIP Proxy-Require:
SIP Remote-Party-ID:
yes
no
SIP GUID:
yes
no
SIP Debug Option:
none
1-line
1-line excl. OPT
1-line excl. NTFY
1-line excl. REG
1-line excl. OPT|NTFY|REG
full
full excl. OPT
full excl. NTFY
full excl. REG
full excl. OPT|NTFY|REG
RTP Log Intvl:
Restrict Source IP:
yes
no
Referor Bye Delay:
Refer Target Bye Delay:
Referee Bye Delay:
Refer-To Target Contact:
yes
no
Sticky 183:
yes
no
Call Feature Settings
Blind Attn-Xfer Enable:
yes
no
MOH Server:
Xfer When Hangup Conf:
yes
no
Conference Bridge URL:
Conference Bridge Ports:
3
4
5
6
7
8
9
10
Proxy and Registration
Proxy:
Use Outbound Proxy:
yes
no
Outbound Proxy:
Use OB Proxy In Dialog:
yes
no
Register:
yes
no
Make Call Without Reg:
yes
no
Register Expires:
Ans Call Without Reg:
yes
no
Use DNS SRV:
yes
no
DNS SRV Auto Prefix:
yes
no
Proxy Fallback Intvl:
Proxy Redundancy Method:
Normal
Based on SRV Port
Voice Mail Server:
Mailbox Subscribe Expires:
Subscriber Information
Display Name:
User ID:
Password:
Use Auth ID:
yes
no
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription
Call Waiting Serv:
yes
no
Block CID Serv:
yes
no
Block ANC Serv:
yes
no
Dist Ring Serv:
yes
no
Cfwd All Serv:
yes
no
Cfwd Busy Serv:
yes
no
Cfwd No Ans Serv:
yes
no
Cfwd Sel Serv:
yes
no
Cfwd Last Serv:
yes
no
Block Last Serv:
yes
no
Accept Last Serv:
yes
no
DND Serv:
yes
no
CID Serv:
yes
no
CWCID Serv:
yes
no
Call Return Serv:
yes
no
Call Back Serv:
yes
no
Three Way Call Serv:
yes
no
Three Way Conf Serv:
yes
no
Attn Transfer Serv:
yes
no
Unattn Transfer Serv:
yes
no
MWI Serv:
yes
no
VMWI Serv:
yes
no
Speed Dial Serv:
yes
no
Secure Call Serv:
yes
no
Referral Serv:
yes
no
Feature Dial Serv:
yes
no
Service Announcement Serv:
yes
no
Audio Configuration
Preferred Codec:
G711u
G711a
G726-16
G726-24
G726-32
G726-40
G729a
G723
Silence Supp Enable:
yes
no
Use Pref Codec Only:
yes
no
Silence Threshold:
high
medium
low
G729a Enable:
yes
no
Echo Canc Enable:
yes
no
G723 Enable:
yes
no
Echo Canc Adapt Enable:
yes
no
G726-16 Enable:
yes
no
Echo Supp Enable:
yes
no
G726-24 Enable:
yes
no
FAX CED Detect Enable:
yes
no
G726-32 Enable:
yes
no
FAX CNG Detect Enable:
yes
no
G726-40 Enable:
yes
no
FAX Passthru Codec:
G711u
G711a
DTMF Process INFO:
yes
no
FAX Codec Symmetric:
yes
no
DTMF Process AVT:
yes
no
FAX Passthru Method:
None
NSE
ReINVITE
DTMF Tx Method:
InBand
AVT
INFO
Auto
FAX Process NSE:
yes
no
Hook Flash Tx Method:
None
AVT
INFO
FAX Disable ECAN:
yes
no
Release Unused Codec:
yes
no
Dial Plan
Dial Plan:
Enable IP Dialing:
yes
no
Emergency Number:
FXS Port Polarity Configuration
Idle Polarity:
Forward
Reverse
Caller Conn Polarity:
Forward
Reverse
Callee Conn Polarity:
Forward
Reverse
Line Enable:
yes
no
Streaming Audio Server (SAS)
SAS Enable:
yes
no
SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
NAT Settings
NAT Mapping Enable:
yes
no
NAT Keep Alive Enable:
yes
no
NAT Keep Alive Msg:
NAT Keep Alive Dest:
Network Settings
SIP TOS/DiffServ Value:
Network Jitter Level:
low
medium
high
very high
extremely high
RTP TOS/DiffServ Value:
Jitter Buffer Adjustment:
up and down
up only
down only
disable
SIP Settings
SIP Port:
SIP 100REL Enable:
yes
no
EXT SIP Port:
Auth Resync-Reboot:
yes
no
SIP Proxy-Require:
SIP Remote-Party-ID:
yes
no
SIP GUID:
yes
no
SIP Debug Option:
none
1-line
1-line excl. OPT
1-line excl. NTFY
1-line excl. REG
1-line excl. OPT|NTFY|REG
full
full excl. OPT
full excl. NTFY
full excl. REG
full excl. OPT|NTFY|REG
RTP Log Intvl:
Restrict Source IP:
yes
no
Referor Bye Delay:
Refer Target Bye Delay:
Referee Bye Delay:
Refer-To Target Contact:
yes
no
Sticky 183:
yes
no
Call Feature Settings
Blind Attn-Xfer Enable:
yes
no
MOH Server:
Xfer When Hangup Conf:
yes
no
Conference Bridge URL:
Conference Bridge Ports:
3
4
5
6
7
8
9
10
Proxy and Registration
Proxy:
Use Outbound Proxy:
yes
no
Outbound Proxy:
Use OB Proxy In Dialog:
yes
no
Register:
yes
no
Make Call Without Reg:
yes
no
Register Expires:
Ans Call Without Reg:
yes
no
Use DNS SRV:
yes
no
DNS SRV Auto Prefix:
yes
no
Proxy Fallback Intvl:
Proxy Redundancy Method:
Normal
Based on SRV Port
Voice Mail Server:
Mailbox Subscribe Expires:
Subscriber Information
Display Name:
User ID:
Password:
Use Auth ID:
yes
no
Auth ID:
Mini Certificate:
SRTP Private Key:
Supplementary Service Subscription
Call Waiting Serv:
yes
no
Block CID Serv:
yes
no
Block ANC Serv:
yes
no
Dist Ring Serv:
yes
no
Cfwd All Serv:
yes
no
Cfwd Busy Serv:
yes
no
Cfwd No Ans Serv:
yes
no
Cfwd Sel Serv:
yes
no
Cfwd Last Serv:
yes
no
Block Last Serv:
yes
no
Accept Last Serv:
yes
no
DND Serv:
yes
no
CID Serv:
yes
no
CWCID Serv:
yes
no
Call Return Serv:
yes
no
Call Back Serv:
yes
no
Three Way Call Serv:
yes
no
Three Way Conf Serv:
yes
no
Attn Transfer Serv:
yes
no
Unattn Transfer Serv:
yes
no
MWI Serv:
yes
no
VMWI Serv:
yes
no
Speed Dial Serv:
yes
no
Secure Call Serv:
yes
no
Referral Serv:
yes
no
Feature Dial Serv:
yes
no
Service Announcement Serv:
yes
no
Audio Configuration
Preferred Codec:
G711u
G711a
G726-16
G726-24
G726-32
G726-40
G729a
G723
Silence Supp Enable:
yes
no
Use Pref Codec Only:
yes
no
Silence Threshold:
high
medium
low
G729a Enable:
yes
no
Echo Canc Enable:
yes
no
G723 Enable:
yes
no
Echo Canc Adapt Enable:
yes
no
G726-16 Enable:
yes
no
Echo Supp Enable:
yes
no
G726-24 Enable:
yes
no
FAX CED Detect Enable:
yes
no
G726-32 Enable:
yes
no
FAX CNG Detect Enable:
yes
no
G726-40 Enable:
yes
no
FAX Passthru Codec:
G711u
G711a
FAX Codec Symmetric:
yes
no
FAX Passthru Method:
None
NSE
ReINVITE
DTMF Tx Method:
InBand
AVT
INFO
Auto
FAX Process NSE:
yes
no
Hook Flash Tx Method:
None
AVT
INFO
FAX Disable ECAN:
yes
no
Release Unused Codec:
yes
no
Dial Plan
Dial Plan:
Enable IP Dialing:
yes
no
Emergency Number:
FXS Port Polarity Configuration
Idle Polarity:
Forward
Reverse
Caller Conn Polarity:
Forward
Reverse
Callee Conn Polarity:
Forward
Reverse
Call Forward Settings
Cfwd All Dest:
Cfwd Busy Dest:
Cfwd No Ans Dest:
Cfwd No Ans Delay:
Selective Call Forward Settings
Cfwd Sel1 Caller:
Cfwd Sel1 Dest:
Cfwd Sel2 Caller:
Cfwd Sel2 Dest:
Cfwd Sel3 Caller:
Cfwd Sel3 Dest:
Cfwd Sel4 Caller:
Cfwd Sel4 Dest:
Cfwd Sel5 Caller:
Cfwd Sel5 Dest:
Cfwd Sel6 Caller:
Cfwd Sel6 Dest:
Cfwd Sel7 Caller:
Cfwd Sel7 Dest:
Cfwd Sel8 Caller:
Cfwd Sel8 Dest:
Cfwd Last Caller:
Cfwd Last Dest:
Block Last Caller:
Accept Last Caller:
Speed Dial Settings
Speed Dial 2:
Speed Dial 3:
Speed Dial 4:
Speed Dial 5:
Speed Dial 6:
Speed Dial 7:
Speed Dial 8:
Speed Dial 9:
Supplementary Service Settings
CW Setting:
yes
no
Block CID Setting:
yes
no
Block ANC Setting:
yes
no
DND Setting:
yes
no
CID Setting:
yes
no
CWCID Setting:
yes
no
Dist Ring Setting:
yes
no
Secure Call Setting:
yes
no
Message Waiting:
yes
no
DND Activated:
yes
no
Distinctive Ring Settings
Ring1 Caller:
Ring2 Caller:
Ring3 Caller:
Ring4 Caller:
Ring5 Caller:
Ring6 Caller:
Ring7 Caller:
Ring8 Caller:
Ring Settings
Default Ring:
1
2
3
4
5
6
7
8
Default CWT:
1
2
3
4
5
6
7
8
Hold Reminder Ring:
1
2
3
4
5
6
7
8
none
Call Back Ring:
1
2
3
4
5
6
7
8
Cfwd Ring Splash Len:
Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy:
New VM Available
New VM Becomes Available
New VM Arrives
Ring On No New VM:
yes
no
Call Forward Settings
Cfwd All Dest:
Cfwd Busy Dest:
Cfwd No Ans Dest:
Cfwd No Ans Delay:
Selective Call Forward Settings
Cfwd Sel1 Caller:
Cfwd Sel1 Dest:
Cfwd Sel2 Caller:
Cfwd Sel2 Dest:
Cfwd Sel3 Caller:
Cfwd Sel3 Dest:
Cfwd Sel4 Caller:
Cfwd Sel4 Dest:
Cfwd Sel5 Caller:
Cfwd Sel5 Dest:
Cfwd Sel6 Caller:
Cfwd Sel6 Dest:
Cfwd Sel7 Caller:
Cfwd Sel7 Dest:
Cfwd Sel8 Caller:
Cfwd Sel8 Dest:
Cfwd Last Caller:
Cfwd Last Dest:
Block Last Caller:
Accept Last Caller:
Speed Dial Settings
Speed Dial 2:
Speed Dial 3:
Speed Dial 4:
Speed Dial 5:
Speed Dial 6:
Speed Dial 7:
Speed Dial 8:
Speed Dial 9:
Supplementary Service Settings
CW Setting:
yes
no
Block CID Setting:
yes
no
Block ANC Setting:
yes
no
DND Setting:
yes
no
CID Setting:
yes
no
CWCID Setting:
yes
no
Dist Ring Setting:
yes
no
Secure Call Setting:
yes
no
Message Waiting:
yes
no
DND Activated:
yes
no
Distinctive Ring Settings
Ring1 Caller:
Ring2 Caller:
Ring3 Caller:
Ring4 Caller:
Ring5 Caller:
Ring6 Caller:
Ring7 Caller:
Ring8 Caller:
Ring Settings
Default Ring:
1
2
3
4
5
6
7
8
Default CWT:
1
2
3
4
5
6
7
8
Hold Reminder Ring:
1
2
3
4
5
6
7
8
none
Call Back Ring:
1
2
3
4
5
6
7
8
Cfwd Ring Splash Len:
Cblk Ring Splash Len:
VMWI Ring Splash Len:
VMWI Ring Policy:
New VM Available
New VM Becomes Available
New VM Arrives
Ring On No New VM:
yes
no
