Cisco-Linksys, LLC

 
Product Information
Product Name:SPA9000Serial Number:FM700F203191
Software Version:3.2.9Hardware Version:1.0.5
MAC Address:000E08E0CBCEClient Certificate:Installed
Licenses:None
 
System Status
Current Time:10/31/2006 07:14:23Elapsed Time:00:03:03
 
FXS 1 Status
Hook State:OnMessage Waiting:No
Call Back Active:NoLast Called Number:
Last Caller Number:
Call 1 State:IdleCall 2 State:Idle
Call 1 Tone:NoneCall 2 Tone:None
Call 1 Encoder:Call 2 Encoder:
Call 1 Decoder:Call 2 Decoder:
Call 1 FAX:Call 2 FAX:
Call 1 Type:Call 2 Type:
Call 1 Remote Hold:Call 2 Remote Hold:
Call 1 Callback:Call 2 Callback:
Call 1 Peer Name:Call 2 Peer Name:
Call 1 Peer Phone:Call 2 Peer Phone:
Call 1 Duration:Call 2 Duration:
Call 1 Packets Sent:Call 2 Packets Sent:
Call 1 Packets Recv:Call 2 Packets Recv:
Call 1 Bytes Sent:Call 2 Bytes Sent:
Call 1 Bytes Recv:Call 2 Bytes Recv:
Call 1 Decode Latency:Call 2 Decode Latency:
Call 1 Jitter:Call 2 Jitter:
Call 1 Round Trip Delay:Call 2 Round Trip Delay:
Call 1 Packets Lost:Call 2 Packets Lost:
Call 1 Packet Error:Call 2 Packet Error:
 
FXS 2 Status
Hook State:OnMessage Waiting:No
Call Back Active:NoLast Called Number:
Last Caller Number:
Call 1 State:IdleCall 2 State:Idle
Call 1 Tone:NoneCall 2 Tone:None
Call 1 Encoder:Call 2 Encoder:
Call 1 Decoder:Call 2 Decoder:
Call 1 FAX:Call 2 FAX:
Call 1 Type:Call 2 Type:
Call 1 Remote Hold:Call 2 Remote Hold:
Call 1 Callback:Call 2 Callback:
Call 1 Peer Name:Call 2 Peer Name:
Call 1 Peer Phone:Call 2 Peer Phone:
Call 1 Duration:Call 2 Duration:
Call 1 Packets Sent:Call 2 Packets Sent:
Call 1 Packets Recv:Call 2 Packets Recv:
Call 1 Bytes Sent:Call 2 Bytes Sent:
Call 1 Bytes Recv:Call 2 Bytes Recv:
Call 1 Decode Latency:Call 2 Decode Latency:
Call 1 Jitter:Call 2 Jitter:
Call 1 Round Trip Delay:Call 2 Round Trip Delay:
Call 1 Packets Lost:Call 2 Packets Lost:
Call 1 Packet Error:Call 2 Packet Error:
 
Line 1 Status
Registration State:Not RegisteredLast Registration At:
Next Registration In:Message Waiting:No
Mapped SIP Port:
 
Line 2 Status
Registration State:Not RegisteredLast Registration At:
Next Registration In:Message Waiting:No
Mapped SIP Port:
 
Line 3 Status
Registration State:Not RegisteredLast Registration At:
Next Registration In:Message Waiting:No
Mapped SIP Port:
 
Line 4 Status
Registration State:Not RegisteredLast Registration At:
Next Registration In:Message Waiting:No
Mapped SIP Port:
 
Auto Attendant Prompt Status
Prompt 1:DefaultPrompt 2:Default
Prompt 3:DefaultPrompt 4:Default
Prompt 5:0 msPrompt 6:0 ms
Prompt 7:0 msPrompt 8:0 ms
Prompt 9:0 msPrompt 10:0 ms
Space Remaining:94500 msCurrent AA:Daytime
 
Internal Music Status
Installed Music Path:Factory Default

 
System Configuration
Restricted Access Domains:
Enable Web Admin Access: Admin Passwd:
User Password:
 
Miscellaneous Settings
Syslog Server:Debug Server:
Debug Level:

 
SIP Parameters
Max Forward:Max Redirection:
Max Auth:SIP User Agent Name:
SIP Server Name:SIP Reg User Agent Name:
SIP Accept Language:DTMF Relay MIME Type:
Hook Flash MIME Type:Remove Last Reg:
Use Compact Header: Escape Display Name:
RFC 2543 Call Hold:
 
SIP Timer Values (sec)
SIP T1:SIP T2:
SIP T4:SIP Timer B:
SIP Timer F:SIP Timer H:
SIP Timer D:SIP Timer J:
INVITE Expires:ReINVITE Expires:
Reg Min Expires:Reg Max Expires:
Reg Retry Intvl:Reg Retry Long Intvl:
 
Response Status Code Handling
SIT1 RSC:SIT2 RSC:
SIT3 RSC:SIT4 RSC:
Try Backup RSC:Retry Reg RSC:
 
RTP Parameters
RTP Port Min:RTP Port Max:
RTP Packet Size:Max RTP ICMP Err:
RTCP Tx Interval:No UDP Checksum:
Stats In BYE:
 
SDP Payload Types
NSE Dynamic Payload:AVT Dynamic Payload:
INFOREQ Dynamic Payload:G726r16 Dynamic Payload:
G726r24 Dynamic Payload:G726r32 Dynamic Payload:
G726r40 Dynamic Payload:G729b Dynamic Payload:
NSE Codec Name:AVT Codec Name:
G711u Codec Name:G711a Codec Name:
G726r16 Codec Name:G726r24 Codec Name:
G726r32 Codec Name:G726r40 Codec Name:
G729a Codec Name:G729b Codec Name:
G723 Codec Name:
 
NAT Support Parameters
Handle VIA received: Handle VIA rport:
Insert VIA received: Insert VIA rport:
Substitute VIA Addr: Send Resp To Src Port:
STUN Enable: STUN Test Enable:
STUN Server:EXT IP:
EXT RTP Port Min:NAT Keep Alive Intvl:
 
PBX Parameters
Proxy Network Interface:Proxy Listen Port:
Multicast Address:Group Page Address:
Max Expires:Force Media Proxy:
Proxy Debug Option:
Call Routing Rule:
Call Park MOH Server:Call Park DLG Refresh Intvl:
Default Group Line:Group 1 User ID:
Group 1 Line:Group 2 User ID:
Group 2 Line:Group 3 User ID:
Group 3 Line:Group 4 User ID:
Group 4 Line:
Hunt Groups:
SIP DIDN Field:SIP DIDN Param Name:
 
Internal Music Source Parameters
Internal Music URL:
Internal Music Script:
Internal MOH Refresh Intvl:Internal Music LBR Codec:
Internal Music Preferred Codec:Internal Music Use Pref Codec Only:
 
Auto Attendant Parameters
AA Dial Plan 1:
AA Dial Plan 2:
AA script 1:
AA script 2:
AA script 3:
DayTime AA: Day Time:
DayTime AA Script:DayTime Answer Delay:
NightTime AA: NightTime AA Script:
NightTime Answer Delay:Weekend/Holiday AA:
Weekends/Holidays:Weekend/Holiday AA Script:
Weekend/Holiday Answer Delay:AA LBR Codec:
AA Preferred Codec:AA Use Pref Codec Only:
AA Decode Inband DTMF:
 
PBX Phone Parameters
Next Auto User ID:Phone Ext Password:
Phone Upgrade Rule:
Phone Dial Plan:
Phone Config XML:
Use LVS_PROXY:

 
Configuration Profile
Provision Enable: Resync On Reset:
Resync Random Delay:Resync Periodic:
Resync Error Retry Delay:Forced Resync Delay:
Resync From SIP: Resync After Upgrade Attempt:
Resync Trigger 1:
Resync Trigger 2:
Resync Fails On FNF:
Profile Rule:
Profile Rule B:
Profile Rule C:
Profile Rule D:
Log Resync Request Msg:
Log Resync Success Msg:
Log Resync Failure Msg:
Report Rule:
 
Firmware Upgrade
Upgrade Enable: Upgrade Error Retry Delay:
Downgrade Rev Limit:
Upgrade Rule:
Log Upgrade Request Msg:
Log Upgrade Success Msg:
Log Upgrade Failure Msg:
License Keys:
 
General Purpose Parameters
GPP A:
GPP B:
GPP C:
GPP D:
GPP E:
GPP F:
GPP G:
GPP H:
GPP I:
GPP J:
GPP K:
GPP L:
GPP M:
GPP N:
GPP O:
GPP P:

 
Call Progress Tones
Dial Tone:
Second Dial Tone:
Outside Dial Tone:
Prompt Tone:
Busy Tone:
Reorder Tone:
Off Hook Warning Tone:
Ring Back Tone:
Confirm Tone:
SIT1 Tone:
SIT2 Tone:
SIT3 Tone:
SIT4 Tone:
MWI Dial Tone:
Cfwd Dial Tone:
Holding Tone:
Conference Tone:
Secure Call Indication Tone:
Feature Invocation Tone:
 
Distinctive Ring Patterns
Ring1 Cadence:Ring2 Cadence:
Ring3 Cadence:Ring4 Cadence:
Ring5 Cadence:Ring6 Cadence:
Ring7 Cadence:Ring8 Cadence:
 
Distinctive Call Waiting Tone Patterns
CWT1 Cadence:CWT2 Cadence:
CWT3 Cadence:CWT4 Cadence:
CWT5 Cadence:CWT6 Cadence:
CWT7 Cadence:CWT8 Cadence:
 
Distinctive Ring/CWT Pattern Names
Ring1 Name:Ring2 Name:
Ring3 Name:Ring4 Name:
Ring5 Name:Ring6 Name:
Ring7 Name:Ring8 Name:
 
Ring and Call Waiting Tone Spec
Ring Waveform:Ring Frequency:
Ring Voltage:CWT Frequency:
 
Control Timer Values (sec)
Hook Flash Timer Min:Hook Flash Timer Max:
Callee On Hook Delay:Reorder Delay:
Call Back Expires:Call Back Retry Intvl:
Call Back Delay:VMWI Refresh Intvl:
Interdigit Long Timer:Interdigit Short Timer:
CPC Delay:CPC Duration:
 
Vertical Service Activation Codes
Call Return Code:Call Redial Code:
Blind Transfer Code:Call Back Act Code:
Call Back Deact Code:Call Back Busy Act Code:
Cfwd All Act Code:Cfwd All Deact Code:
Cfwd Busy Act Code:Cfwd Busy Deact Code:
Cfwd No Ans Act Code:Cfwd No Ans Deact Code:
Cfwd Last Act Code:Cfwd Last Deact Code:
Block Last Act Code:Block Last Deact Code:
Accept Last Act Code:Accept Last Deact Code:
CW Act Code:CW Deact Code:
CW Per Call Act Code:CW Per Call Deact Code:
Block CID Act Code:Block CID Deact Code:
Block CID Per Call Act Code:Block CID Per Call Deact Code:
Block ANC Act Code:Block ANC Deact Code:
DND Act Code:DND Deact Code:
CID Act Code:CID Deact Code:
CWCID Act Code:CWCID Deact Code:
Dist Ring Act Code:Dist Ring Deact Code:
Speed Dial Act Code:Secure All Call Act Code:
Secure No Call Act Code:Secure One Call Act Code:
Secure One Call Deact Code:Conference Act Code:
Attn-Xfer Act Code:Modem Line Toggle Code:
FAX Line Toggle Code:
Referral Services Codes:
Feature Dial Services Codes:
 
Vertical Service Announcement Codes
Service Annc Base Number:
Service Annc Extension Codes:
 
Outbound Call Codec Selection Codes
Prefer G711u Code:Force G711u Code:
Prefer G711a Code:Force G711a Code:
Prefer G723 Code:Force G723 Code:
Prefer G726r16 Code:Force G726r16 Code:
Prefer G726r24 Code:Force G726r24 Code:
Prefer G726r32 Code:Force G726r32 Code:
Prefer G726r40 Code:Force G726r40 Code:
Prefer G729a Code:Force G729a Code:
 
Miscellaneous
Set Local Date (mm/dd):Set Local Time (HH/mm):
Time Zone:FXS Port Impedance:
Daylight Saving Time Rule:
FXS Port Input Gain:FXS Port Output Gain:
DTMF Playback Level:DTMF Playback Length:
Detect ABCD: Playback ABCD:
Caller ID Method:Caller ID FSK Standard:
Feature Invocation Method:

 
Line Enable:
 
Network Settings
SIP ToS/DiffServ Value:SIP CoS Value:[0-7]
RTP ToS/DiffServ Value:RTP CoS Value:[0-7]
Network Jitter Level:Jitter Buffer Adjustment:
 
SIP Settings
SIP Port:SIP Remote-Party-ID:
SIP Debug Option:RTP Log Intvl:
Restrict Source IP: Referor Bye Delay:
Refer Target Bye Delay:Referee Bye Delay:
Refer-To Target Contact: Sticky 183:
 
Subscriber Information
Display Name:User ID:
 
Dial Plan
Dial Plan:
 
Mailbox Status
Message Waiting:
 
Streaming Audio Server (SAS)
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf: Conference Bridge URL:
Conference Bridge Ports:Enable IP Dialing:
Emergency Number:Mailbox ID:
 
Audio Configuration
Preferred Codec:Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
DTMF Process INFO: FAX Codec Symmetric:
DTMF Process AVT: FAX Passthru Method:
DTMF Tx Method:FAX Process NSE:
Hook Flash Tx Method:FAX Disable ECAN:
Release Unused Codec: FAX Enable T38:
FAX Tone Detect Mode:
 
FXS Port Polarity Configuration
Idle Polarity:Caller Conn Polarity:
Callee Conn Polarity:

 
Line Enable:
 
Network Settings
SIP ToS/DiffServ Value:SIP CoS Value:[0-7]
RTP ToS/DiffServ Value:RTP CoS Value:[0-7]
Network Jitter Level:Jitter Buffer Adjustment:
 
SIP Settings
SIP Port:SIP Remote-Party-ID:
SIP Debug Option:RTP Log Intvl:
Restrict Source IP: Referor Bye Delay:
Refer Target Bye Delay:Referee Bye Delay:
Refer-To Target Contact: Sticky 183:
 
Subscriber Information
Display Name:User ID:
 
Dial Plan
Dial Plan:
 
Mailbox Status
Message Waiting:
 
Streaming Audio Server (SAS)
SAS Enable: SAS DLG Refresh Intvl:
SAS Inbound RTP Sink:
 
Call Feature Settings
Blind Attn-Xfer Enable: MOH Server:
Xfer When Hangup Conf: Conference Bridge URL:
Conference Bridge Ports:Enable IP Dialing:
Emergency Number:Mailbox ID:
 
Audio Configuration
Preferred Codec:Silence Supp Enable:
Use Pref Codec Only: Silence Threshold:
G729a Enable: Echo Canc Enable:
G723 Enable: Echo Canc Adapt Enable:
G726-16 Enable: Echo Supp Enable:
G726-24 Enable: FAX CED Detect Enable:
G726-32 Enable: FAX CNG Detect Enable:
G726-40 Enable: FAX Passthru Codec:
DTMF Process INFO: FAX Codec Symmetric:
DTMF Process AVT: FAX Passthru Method:
DTMF Tx Method:FAX Process NSE:
Hook Flash Tx Method:FAX Disable ECAN:
Release Unused Codec: FAX Enable T38:
FAX Tone Detect Mode:
 
FXS Port Polarity Configuration
Idle Polarity:Caller Conn Polarity:
Callee Conn Polarity:

 
Line Enable:
 
Network Settings
SIP ToS/DiffServ Value:SIP CoS Value:[0-7]
RTP ToS/DiffServ Value:RTP CoS Value:[0-7]
 
SIP Settings
SIP Port:SIP 100REL Enable:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: SIP GUID:
SIP Debug Option:Restrict Source IP:
Referor Bye Delay:Refer Target Bye Delay:
Referee Bye Delay:Refer-To Target Contact:
 
Subscriber Information
Display Name:User ID:
Password:Use Auth ID:
Auth ID:Call Capacity:
Contact List:
Cfwd No Ans Delay:
 
Dial Plan
Dial Plan:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg:NAT Keep Alive Dest:
EXT SIP Port:
 
Proxy and Registration
Proxy:
Outbound Proxy:
Use Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires:Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl:Proxy Redundancy Method:
Mailbox Status:Mailbox Subscribe URL:
Mailbox Deposit URL:Mailbox Subscribe Expires:
Mailbox Manage URL:VMSP Bridge:

 
Line Enable:
 
Network Settings
SIP ToS/DiffServ Value:SIP CoS Value:[0-7]
RTP ToS/DiffServ Value:RTP CoS Value:[0-7]
 
SIP Settings
SIP Port:SIP 100REL Enable:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: SIP GUID:
SIP Debug Option:Restrict Source IP:
Referor Bye Delay:Refer Target Bye Delay:
Referee Bye Delay:Refer-To Target Contact:
 
Subscriber Information
Display Name:User ID:
Password:Use Auth ID:
Auth ID:Call Capacity:
Contact List:
Cfwd No Ans Delay:
 
Dial Plan
Dial Plan:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg:NAT Keep Alive Dest:
EXT SIP Port:
 
Proxy and Registration
Proxy:
Outbound Proxy:
Use Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires:Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl:Proxy Redundancy Method:
Mailbox Status:Mailbox Subscribe URL:
Mailbox Deposit URL:Mailbox Subscribe Expires:
Mailbox Manage URL:VMSP Bridge:

 
Line Enable:
 
Network Settings
SIP ToS/DiffServ Value:SIP CoS Value:[0-7]
RTP ToS/DiffServ Value:RTP CoS Value:[0-7]
 
SIP Settings
SIP Port:SIP 100REL Enable:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: SIP GUID:
SIP Debug Option:Restrict Source IP:
Referor Bye Delay:Refer Target Bye Delay:
Referee Bye Delay:Refer-To Target Contact:
 
Subscriber Information
Display Name:User ID:
Password:Use Auth ID:
Auth ID:Call Capacity:
Contact List:
Cfwd No Ans Delay:
 
Dial Plan
Dial Plan:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg:NAT Keep Alive Dest:
EXT SIP Port:
 
Proxy and Registration
Proxy:
Outbound Proxy:
Use Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires:Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl:Proxy Redundancy Method:
Mailbox Status:Mailbox Subscribe URL:
Mailbox Deposit URL:Mailbox Subscribe Expires:
Mailbox Manage URL:VMSP Bridge:

 
Line Enable:
 
Network Settings
SIP ToS/DiffServ Value:SIP CoS Value:[0-7]
RTP ToS/DiffServ Value:RTP CoS Value:[0-7]
 
SIP Settings
SIP Port:SIP 100REL Enable:
Auth Resync-Reboot: SIP Proxy-Require:
SIP Remote-Party-ID: SIP GUID:
SIP Debug Option:Restrict Source IP:
Referor Bye Delay:Refer Target Bye Delay:
Referee Bye Delay:Refer-To Target Contact:
 
Subscriber Information
Display Name:User ID:
Password:Use Auth ID:
Auth ID:Call Capacity:
Contact List:
Cfwd No Ans Delay:
 
Dial Plan
Dial Plan:
 
NAT Settings
NAT Mapping Enable: NAT Keep Alive Enable:
NAT Keep Alive Msg:NAT Keep Alive Dest:
EXT SIP Port:
 
Proxy and Registration
Proxy:
Outbound Proxy:
Use Outbound Proxy: Use OB Proxy In Dialog:
Register: Make Call Without Reg:
Register Expires:Ans Call Without Reg:
Use DNS SRV: DNS SRV Auto Prefix:
Proxy Fallback Intvl:Proxy Redundancy Method:
Mailbox Status:Mailbox Subscribe URL:
Mailbox Deposit URL:Mailbox Subscribe Expires:
Mailbox Manage URL:VMSP Bridge:
   
PBX Status
User Login      basic   |  advanced



Copyright 1992-2006 Cisco Systems, Inc. All Rights Reserved.